FM Transmitter Radio Stereo broadcast FM Transmitter broadcasts in both high and low power output modes.
This FM wireless transmitter is available for drive in church and using in factories, schools, supermarkets, farms, office and some quiet spaces or creating your own radio station,etc
The FM Transmitter will not drift between stations because of our advanced stereo PLL Digital Tuner Technology, and which is designed to operate non-stop 24/7.
The FM radio transmitter crust is made of high-quality aluminum, which also is the heating panel of power amplifier RD06HVF1, with blue back-light LCD to display five digits of frequency.
The motherboard is applied with chip BH1415F, which is the new-generation integrated NC FM stereo radio chip by ROHM, built-in PLL frequency, audio pre-emphasis, limiter and low pass filter circuit. Make sound more sweet.
With a high gain antenna, the low power fm transmitter is able to broadcast in a short range (300 feet), such as home, apartment, church, school, church parking lot, club, camping, backyard, resident village.
FAQ OF FM Transmitter Radio
Q: Does this come with the power supply and antenna?
A: It comes with an AC adapter (wall wart) for power, and a 7” rubberized antenna.
Q: How difficult is this to set up?
A: The setup is very simple, and product manual is attached for you.
Q: How far distance can the transmitter signal reach?
A: The distance range of this FM transmitter radio used is 900 feet.
“Used at church for drive in service and it worked great, drove around the block and signal was good.”
Q: Does this have one or two inputs?
A: There are two inputs available.
1 Audio input to accept a line level input from a Mixer etc.
1 Mic Input to accept a direct signal from a Microphone.
Will this work in a metal building.
It will work when used in a building with a metal roof.
Working voltage: 11V~13V (rated voltage 12V)
Audio harmonic: ≤－60dB
Working current: <0.5A
Audio distortion: 0.3%
Frequency range: 76~108MHZ
Frequency response: 50HZ~15000HZ
Frequency stability: ±10PPM
Pre-emphasis delay: 50us
Frequency step: 100KHZ
Environmental working temperature: -10-45 (℃)
Input level: ≤15 dB
Input impedance: 50Ω
Modulation frequency deviation: ±75KHZ
RF power range: H file: 0.5W L file: 0.1W
Signal to noise ratio: ≥70dB
Reference Range:0m-300m(Obstacle environment) 0m – 600m (A barrier-free environment)
Input level:≤15 dB
Modulation frequency deviation:±75KHZ
Input connectors: 3.5mm Mini phone
SNR(Signal to Noise Ratio):≧60 dB
1 * Professional antenna
1 * Power Adapter
1 * Power cord
1 * Audio cable
1 * Manual