Automatic Digital Label Dispenser X-100 Automatic Label Glass Machine with Counting Function

1. Easy operation:

The sticker dispenser is easy to operate,

fully automatic peeling, the label is flat, without wrinkles,

the second sheet is automatically sent out after the label is taken out,

and the small labels can be arranged in several rows and peeled at one time.

2. High efficiency:

Fully automatic digital label peeling machine

One machine can be used by multiple people,

Use our label roll dispenser can peel off the label smoothly,

without wrinkles, save labor, and improve production efficiency.

3. Automatic Counting:

The automatic label stripper has an optional 0~999999 automatic counting function,

which is convenient for calculating the output.

Our label dispenser machine is simple to operate.

4. Applicable Labels:

Suitable for dispensing various labels,

Applicable maximum diameter: 250 mm, width: 5-100 mm,

including self-adhesive label, anti-counterfeiting label etc,

The label dispenser output speed 130 mm / sec

5. Wide Application:

The main body of the equipment are painted with stainless steel and aluminum alloy,

the general structure is firm and elegant,

so automatic label roll dispenser?is ideal to be used in industries such as electronics manufacturing industry, chemical pharmaceutical industry, food processing industry, logistics.

Parameter:
Model: X-100
Specification: 136*174*280mm
Speed: 130mm/sec
Label width: 5-100mm
Maximum diameter: 250mm

Operation steps:
1. Install the label on the scrap shaft as shown in the figure;
2. Use the "U-shaped card" to snap the front end of the label into the "waste shaft";
3. Adjust the "snap ring" so that the label will not move left and right;
4. Adjust the motor speed and delay time to the minimum;
5. Turn on the power switch;
6. Adjust the motor speed and delay time according to the length of the label;
7. It works normally after being adjusted to the appropriate speed and time.