☆ Fast installation in 60 seconds: The weight of our bike rack is between 2.1-4.5kg, which is easy to carry and install. With the help of quick-release fasteners and synthetic rubber vacuum suction cups, the bicycle can be easily and firmly secured to the roof.
☆Does not damage the paint and sheet metal: We use synthetic rubber suction cups to be sucked on the roof, which will not damage the paint and sheet metal. The maximum load-bearing capacity of the frame is 50kg.
☆Compatibility: The top bicycle rack can accommodate one, two and three bicycles, and is suitable for all road bikes, mountain bikes, and soft-tail vehicles that support quick release and barrel axle forks. It can be used for all cars that can be equipped with vacuum suction cups.
☆Stability: The suction cup of the vacuum pump ensures a firm frame. The crank is fixed with a high-strength Velcro, which can prevent the pedal from wearing the car top cover.
☆Low wind resistance: The casing and exquisite frame shape can control wind resistance and greatly reduce noise, making your driving environment more comfortable.
1. Do not open the car sunroof while driving.
2. Speed should be less than 120 Km/h when using the bike rack.
3. Cleaning the suction cup interior and the car roof before using, but do not leave too much water.
4. Please do not use the bike rack on the car glass.
5. After using, please cover up the suction cup.
6. Please check whether the bike rack still works normally every 4 hours.
7. When using, the white plunger need to be pointed towards the back of your car.
8. Before using, please check all the bolts are tightened.
Suction Cup Bike Rack Car Roof-Top Cycle Rack Carrier Car Top Bicycle Holder with Sucker Bike Carrier
Material: Aluminum Alloy Rubber
3 models available: for 1 bike, for 2 bikes, for 3 bikes
Length: approx 47cm / 82cm / 92cm
Weight: approx 2.1kg / 3.4kg / 4.5kg
Bike carrier, Velcro strap for the crank, Rear wheel suction.
Please note: Bike Racks are suitable for the width of bike front fork which is shorter than 110mm.
SUPPORT FOR REAR WHEEL
The suction cup holder keeps the rear wheel of the bike in place, fits both for the MTB wheel and for the racing bike wheel.
VELCRO FOR CRANK
The Velcro strap helps to fix the crank well keeping it stable. And avoid damaging to your car and your bike.
QUICK RELEASE & ADAPTER
You can easily install for the bike with quick release, but for the bike with the through pin, you have to buy an adapter separately to apply. You could find adapters in our shop or buy somewhere else.
1. Find the correct position and wipe the roof. Position the suction cup on the part with higher sheet strength
2. After gently pressing the suction cup downwards. Repeatedly press the piston rod to the vacuum state of the suction cup, and there is no force to rebound
3. Quickly grasp the front wheel of the bicycle, and lock the roof rack of the bicycle front fork with quick release
4. Confirm the position of the rear wheel and wipe the car item
5.After installing the rear wheel suction cup, wrap the rear wheel with strong nylon velcro until it does not shake.
6. Fix the crank with the complimentary Velcro to avoid scratching the paint